| |
need to consult us
Please call hotline
+86-576-87556858 |
|
|
|
 |
News |
 |
| |
Kero throttle body to teach you properly understand the car tire wear
|
| Release time：2013.08.21 News source：Yuhuan TRV Throttle Body Co.,ltd,Throttle Body,Throttle Valve Browsing number： |
| |
Tires on a car belonging to consumables, and rough roads every day and the depth of the contact, wear and tear is inevitable nature of things, after a period of use must be replaced. However, some abnormal wear will shorten the life of the tire, it laid off in advance, and sometimes from tire wear can be found in the car hidden faults, so must not be taken lightly. If the car is generally not a problem, tire wear should be uniform, and if your vehicle tire wear is not uniform, it may be a problem.
Tires are not negligible when the vehicle maintenance part, although many owners will think to maintain it, but there are still many needs to pay attention to where the place.
According Kero Throttle Body understand it, when the tire tread depth is worn to 1.6mm, this time the tire braking, driving, anti-skid capability decreased linearly, severely reduced, to reach this degree of wear, the tire must be replaced; tire tread depth wear to 3.0mm, this time the tire skid braking capacity and ability began to decline, especially in the rain feeling the most obvious.
Each remaining tire tread groove depth of 1.6 mm Location wear signs, signs along the sidewall of the triangle, you can tread pattern found signs of wear. Michelin tire shoulders as a "small head", and the indicator located on the "small head" at the bottom of the tread grooves, the height of 1.6 mm, if the tread rubber and the tread block wear to the same height of the protruding marks , must immediately replace the tires. Otherwise, when used on slippery surfaces worn tires, easily lead to loss of control.
The pneumatic tire suitable to improve the amount of tire rolling resistance can be reduced, saving fuel. However, excessive inflation, not only affect tire damping performance, but also to excessive tire deformation, and the ground contact area is reduced, normal wear and tear can only assume from the central part of the tread, the formation of early wear and tear. If used on a narrow wheel base tires can also cause early wear central part.
Individual parts of the tire shape alopecia occurs because the tires wear poor balance. When the high-speed rotation of the wheel imbalance, the individual parts of a large force, accelerated wear and tear, while steering flow, and manipulation performance deteriorated. If the moving direction of the velocity found in a particular when there is a slight jitter, it should be balanced on the wheels to prevent the emergence of alopecia areata shape wear.
According to the Throttle Body Kero noted, tires have their own life, even if not used new tires, put a long overdue aging will not be in use. Typically, tire life is 3-5 years. Michelin tires are 5 years since the production out to the car tire really use this "place of" no more than the aging period, or should be scrapped. From the point of kilometers traveled, the general running of the tire should be replaced eighty-nine ten thousand kilometers. So when the owners are going to see in the purchase of tires used tire numbers, such as "99N08B5820" says August 1999 Group B production. |
| |
|
