Yuhuan Kailuo Auto Parts Co., Ltd.  
contact us Contact Us Englishchina
nav-left
Home About Us News Products Quality Facility Service center Order online
nav-Right
 
 
 
 
  News
 
Industry News
Company News
 
  need to consult us
Please call hotline
+86-576-87556858
 
 
News
 
Yourself to the car waxing, saving time and money that
Release time:2014.05.24 News source:Yuhuan TRV Throttle Body Co.,ltd,Throttle Body,Throttle Valve Browsing number:
 

● (first step) preparation before waxing / How to choose car wax

    Currently Auto Parts City, Taobao merchants and major electricity supplier has a very rich kind of wax for your choice. Cheap ordinary wax from tens of dollars to hundreds of dollars of high-end wax readily available. Suggest that you buy some big brands in the end price Chela enough, the price is generally between 60-150 million, is the most cost effective choice.

    ● (second step) is very important to choose the right venue

    According Kero Electronic throttle body is understood to car waxing first election venue is very important, try to choose the open air open space because wax contains harmful chemicals, there is a certain pungent odor and toxicity, improper use of the human central nervous system inhibition may cause drowsiness, dizziness, so if there is respiratory diseases owners discretion to consider the proposal in accordance with the actual situation of their own bodies, if conditions permit can consider wearing a mask. Of course, the open space selected, have to be careful not to be waxed in strong sunlight, because of the strong sunlight will cause the paint gets hot, and paint adhesion becomes overheated wax will make a low, thus affecting waxing effect.

    ● (third step) first re-waxing the car wash

    To the front of the car waxing must remember that the car clean, dirty car is not waxing, because there is a small dusty corners when waxing rub back and forth repeatedly, these fine dust will damage the paint, so that more harm than good . And if the vehicle surface is dirty, we will not convenient operation, dirty clothes, do not say, dust everywhere on the body is not good.

    ● (fourth step) check before waxing body, focusing on the need to see where

    After the car wash, you can start waxing up, look at yourself first before waxing car body parts which have small scars, there is a small scar where the waxing when you can handle it more carefully focused. Of course, there is only a small scar to say, after all the wax is not a panacea, it is impossible to repair what scars are.

    ● (Step Five) start waxing / liquid wax using the method described

    First, Kero Electronic throttle body to introduce the easiest, most convenient and cheapest liquid wax. Very simple to use, simply spray the liquid evenly on the paint can. Subregional work, such as the hood of the first work to complete before waxing waxing next area. So methodical, and will not have been in front of a good spray did not had time to rub. Can be seen from the figure, although the car has been washed looks very clean, but only after Cawan an engine cover, the towel is still a layer of dirt. After the completion of an area according to this method can be repeated to complete the whole process of waxing.

    ● solid wax and paste wax using the method described

    Use paste wax and solid wax wax first in the sponge will spread evenly, then we are still working first subregion, after completion of a portion of waxing waxing work the next area. Method is to use a wax applicator sponge paint semicircular turn on waxing, try to figure the rules a little too tight, usually an area needs painting finished 3-5 minutes. After a while, such as coating, to be coated with wax to dry, and then towel to wipe, wipe it carefully, can be a little harder than that, let the wax more evenly in the paint surface to form a layer of wax film.

    ● milky wax using the method described

    The most Hou Kailuo Electronic throttle body how to use car wax emulsion, milky white emulsion wax is a viscous liquid, the use of the first wax slowly squeeze the sponge waxing special (usually supplied with wax) , so as not to waste too much time crowding around 5 ml is sufficient, to be completely exhausted in the crowd. Methods and front the same way when waxing paste wax solid and we introduce, sponge moistened with wax on the paint applied to the n-type. So after painting milky wax on the paint dries, wipe it with a dry towel, rub the same time need to be taken to avoid the wax stains on the plastic parts of the vehicle.

    ● How to determine when to re-waxing / Do not throw the packaging waste

    A box of wax can probably use about 10 times, after use, do not discard the packaging, because the wax contains some oil and other synthetic substances will cause damage to the environment, so the waste should not be thrown away the packaging. If you have time and convenience, you can choose the city dedicated recycling waste wax, petroleum products company, there are many such companies information on Baidu, you can search about this local company, handled by them, if they are located City inconvenient to go to recycling companies, packaging wax can be classified separately, and then into non-recyclable trash class.

 

 
 
 
 
ABOUT US NEWS PRODUCTS SERVICE CENTER LINK
 
Company Profile
Corporate Culture
Talents
Location
Industry News
Company News
All Products Service concept
Sales Network
汽车泄压阀  机床主轴  铝摆臂  制动器活塞  铝阳极氧化  轮毂单元  电动卷膜器  
Copyright © Yuhuan TRV Throttle Body Co.,ltd Address:Auto & Motor Industrial Zone,Yuhuan,Zhejiang,China   E-mail: manager@throttle-valve.com / sales@throttle-valve.com 
QQ 2537451886
QQ 2215696660
Email trv@throttle-valve.com
Email manager@throttle-valve.com
TEL 0086-576-87556858
Mobile View Website