Throttle blade if dirty, will affect the engine produces is unstable idle speed, although the jet engine cars have step meter motor, even the electronic throttle to idle speed control in front of the throttle body, although there will be air filter filter the air, but it iseasily dirty, regular cleaning still has its the necessity of.

In simple terms, when the acceleration pedal is stepped on, through the cable willthrottle blade opened the throttle body, Carol said this time the air into the intake manifold, found the air changed much, will increase the fuel injection and detectionmechanism of engine, in order to match a standard air fuel ratio of fuel into the combustion chamber. Of course there is a complex process.

In the early days, the general master the use of clearing agent out of the way when cleaning, directly toward the throttle internal do spray cleaning action. Cairo said the throttle body and this time we use wipe manner. This is because the cleaning agentwill corrode the plastic, rubber type material, but also the lubricating oil dissolved allall. So the spraying way although the area can be more widely, but the course of timewill cause the internal parts damage, easy to cause the problem of idle speed step motor, oil seal.

After the completion of the clearing, Carol throttle body says it will also pay attention to hoses to go back, because this demonstration is a turbocharged models, so if thehose is not firm installation, the inlet pressure is too large is likely to occur leakage or hose off phenomenon. In all actions are completed, just started the moment is not fierce refueling pulling speed, hand car is still in the cold car range is not up to operating temperature, on the other hand is if there were not installed problems can also be found in time, causing greater problems not fault.